LSIS 6731001500, User Manual

Page: 161 / 659

148
Learning Advanced Features
Auxiliary Reference Setting Details
Code Description
BAS-01 Aux Ref
Src
Set the input type to be used for the auxiliary frequency reference.
Configuration Description
0
None Auxiliary frequency reference is disabled
1 V1 Sets the V1 (voltage) terminal at the control terminal block as
the source of auxiliary frequency reference.
3 V2 Sets the I2 (voltage) terminal at the control terminal block as
the source of auxiliary frequency reference (SW4 must be set
to ‘voltage’).
4 I2 Sets the I2 (current) terminal at the control terminal block as
the source of auxiliary frequency reference (SW4 must be set
to ‘current’).
5 Pulse Sets the TI (pulse) terminal at the control terminal block as the
source of auxiliary frequency reference.
BAS-02
Aux Calc Type
Set the auxiliary reference gain with BAS-03 (Aux Ref Gain) to configure the
auxiliary reference and set the percentage to be reflected when calculating the
main reference. Note that items 4–7 below may result in either plus (+) or minus
(-) references (forward or reverse operation) even when unipolar analog inputs
are used.
Configuration Formula for frequency reference
0 M+(G*A) Main ref(BAS-03x BAS-01xIN-01)
1 M*(G*A) Main reference x(BAS-03x BAS-01)
2 M/(G*A) Main reference /( BAS-03x BAS-01)
3 M+{M*(G*A)} Main ref{ Main reference x(BAS-03x BAS-
01)}
4 M+G*2*(A-50) Main ref BAS-03x2x(BAS-01–50)xIN-01
5 M*{G*2*(A-50)} Main reference x{ BAS-03x2x(BAS-01–50)}
6 M/{G*2*(A-50)} Main reference /{ BAS-03x2x(BAS-01–50)}