LSIS 6731001500, User Manual

Page: 275 / 659

262
Learning Advanced Features
Run Easy Start On to easily setup the basic motor parameters required to operate a motor in a
batch. Set CNF-61 (Easy Start On) to ‘1 (Yes)’ to activate the feature, initialize all parameters by
setting CNF-40 (Parameter Init) to ‘1 (All Grp)’, and restart the inverter to activate Easy Start On.
Group Code Name LCD Display Parameter Setting Setting Range Unit
CNF 61
Parameter easy start
settings
Easy Start On 1 Yes - -
Code Description
CNF-61
Easy Start
On
Follow the procedures listed below to set the easy start on parameters.
No Procedures
1 Set CNF-61 (Easy Start On) to ‘1(Yes)’.
2 Select
‘
1 (All Grp)’ in CNF-40 (Parameter Init) to initialize all parameters
3 Restarting the inverter will activate Easy Start On. Set the values in the following
screens on the Keypad. To escape from Easy Start On, press the [ESC] key.
•
Start Easy Set: Select ‘Yes’.
•
CNF-43: Select a macro.
•
BAS-10 60/50 Hz Sel: Set motor rated frequency.
•
DRV-14 Motor Capacity: Set motor capacity.
•
BAS-13 Rated Curr: Set motor rated current.
•
BAS-15 Rated Volt: Set motor rated voltage.
•
BAS-11 Pole Number: Set motor pole number.
•
BAS-19 AC Input Volt: Set input voltage.
•
PRT-08 Select start at trip reset
•
PRT-09 Retry Number: Sets the number of restart trial when
performing a trip reset.
•
COM-96 PowerOn Resume: Sets the serial communication restart
function.
•
CON-71 SpeedSearch: Set SpeedSearch.
•
DRV-06 Cmd Source: Set command source.
•
DRV-07 Freq Ref Src: Set Frequency Reference source.
•
AP3-01 Now Date : Set the current date.
•
AP3-02 Now Time : Set the current time.
When the settings are complete, the minimum parameter settings on the motor
have been made. The Keypad will return to a monitoring display. Now the motor