LSIS 6731001500, User Manual

Page: 154 / 659

141
Learning Basic Features
Group Code Name LCD Display
Parameter
Setting
Setting Range Unit
frequency
4.19 2
nd
Operation Mode Setting
Apply two types of operation modes and switch between them as required. For both the first and
second command source, set the frequency after shifting operation commands to the multi-
function input terminal. Mode switching can be used to stop remote control during an operation
using the communication option and to switch operation mode to operate via the local panel, or
to operate the inverter from another remote control location.
Select one of the multi-function terminals from codes IN-65–71 and set the parameter value to 15
(2nd Source).
Group Code Name LCD Display Parameter Setting Setting Range Unit
DRV
06 Command source Cmd Source 1 Fx/Rx-1 0–5 -
07
Frequency reference
source
Freq Ref Src 2 V1 0–11 -
BAS
04
2nd Command
source
Cmd 2nd Src 0 Keypad 0–5 -
05
2nd Frequency
reference source
Freq 2nd Src 0 KeyPad-1 0–11 -
IN 65–71
Px terminal
configuration Px Define
(Px: P1–P7)
17 2nd Source 0–55 -
2nd Operation Mode Setting Details
Code Description
BAS-04 Cmd 2nd Src
BAS-05 Freq 2nd Src
If signals are provided to the multi-function terminal set as the 2 nd
command source (2nd Source), the operation can be performed using the
set values from BAS-04-05 instead of the set values from the DRV-7 and
DRV-01.
The 2nd command source settings cannot be changed while operating
with the 1
st command source (Main Source).