LSIS 6731001500, User Manual

Page: 102 / 659

89
Learning Basic Features
4.2.1 Keypad as the Source (KeyPad-1 setting)
You can modify frequency reference by using the keypad and apply changes by pressing the
[ENT/PROG] key. To use the keypad as a frequency reference input source, go to DRV-07
(Frequency reference source) and change the parameter value to ‘0 (Keypad-1)’. Input the
frequency reference for an operation at DRV-01 (Frequency reference).
Group Code Name LCD Display Parameter Setting Setting Range Unit
DRV
01
Frequency
reference
Cmd Frequency 0.00
0.00, Low
Freq– High
Freq*
Hz
07
Frequency
reference source
Freq Ref Src 0 KeyPad-1 0–11 -
* You cannot set a frequency reference that exceeds the Max. Frequency, as configured with DRV-
20.
4.2.2 Keypad as the Source (KeyPad-2 setting)
You can use the [UP] and [DOWN] cursor keys to modify a frequency reference. To use this as a
second option, set the keypad as the source of the frequency reference, by going to DRV-07
(Frequency reference source) and change the parameter value to ‘1 (Keypad-2)’. This allows
frequency reference values to be increased or decreased by pressing the [UP] and [DOWN] cursor
keys.
Group Code Name LCD Display Parameter Setting Setting Range Unit
DRV
07
Frequency
reference source Freq Ref
Src
1 KeyPad-2 0–11 -
01
Frequency
reference
0.00
0.00, Low Freq–
High Freq*
Hz
*You cannot set a frequency reference that exceeds the Max. Frequency, as configured with DRV-
20.
4.2.3 V1 Terminal as the Source
You can set and modify a frequency reference by setting voltage inputs when using the V1