LSIS 6731001500, User Manual

Page: 317 / 659

304
Learning Advanced Features
Code Description
OUT-01 AO1
Mode
Select a constant value for output. The following example for output voltage
setting.
Setting Function
0 Frequency Outputs operation frequency as a standard. 10 V output is
made from the frequency set at DRV-20 (Max Freq).
1 Output
Current 10 V output is made from 150% of inverter rated current.
2 Output
Voltage Sets the outputs based on the inverter output voltage. 10 V
output is made from a set voltage in BAS-15 (Rated V).
If 0 V is set in BAS-15, 200 V/400 V models output
10 V based on the actual input voltages (240 V and 480 V
respectively).
3 DC Link
Volt Outputs inverter DC link voltage as a standard.
Outputs 10 V when the DC link voltage is 410 V DC for 200 V
models, and 820 V DC for 400 V models.
4 Output
Power Monitors output wattage. 150% of rated output is the
maximum display voltage (10 V).
7 Target
Freq Outputs set frequency as a standard. Outputs 10 V at the
maximum frequency (DRV-20).
8 Ramp
Freq Outputs frequency calculated with Acc/Dec function as a
standard. May vary with actual output frequency. Outputs 10 V.
9 PID Ref
Value Outputs command value of a PID controller as a standard.
Outputs approximately 6.6 V at 100%.
10 PID Fdk
Value
Outputs feedback volume of a PID controller as a standard.
Outputs approximately 6.6 V at 100%.
11 PID
Output
Outputs output value of a PID controller as a standard. Outputs
approximately 10 V at 100%.
12 Constant Outputs OUT-05 (AO1 Const %) value as a standard.
13 EPID1
Output
Output is based on the output value of the external PID1
controller. Outputs 10 V in 100%.