LSIS 6731001500, User Manual

Page: 90 / 659

Perform Basic Operations
77
3.3 Fault Monitoring
3.3.1 Monitoring Faults during Inverter Operation
The following example shows how to monitor faults that occurred during inverter operation.
•
If a fault trip occurs during inverter operation, the inverter
enters Trip mode automatically and displays the type of
fault trip that occurred.
•
Press the [Down] key to view the information on the
inverter at the time of fault, including the output
frequency, output current, and operation type.
•
If there were any fault trips that occurred previously, press
the [Right] key to display the fault trip information at the
times of previous fault trips.
•
When the inverter is reset and the fault trip is released,
the keypad display returns to the screen it was at when
the fault trip occurred.