LSIS 6731001500, User Manual

Page: 86 / 659

Perform Basic Operations
73
Parameter setting in AUTO mode
3.2.8 Setting the Monitor Display Items
In Monitor mode, 3 different items may be monitored at once. Certain monitor items, such as the
frequency reference, are selectable. The display items to be displayed on the screen can be
selected by the user in the Config (CNF) mode. However, in HAND mode or in OFF mode, the first
display item is permanently fixed as the frequency reference. On the top-
right
•
Ensure that the cursor is at the frequency reference item.
If not, move the cursor to the frequency reference item.
•
While the cursor is at the frequency reference monitor
item, press the [PROG/ENT] key to edit the frequency
reference.
•
Detailed information is displayed and the cursor flashes at
the input line. A flashing cursor indicates that it is waiting
for user input.
•
Press the [Left] or [Right] key to move the cursor.
•
Press the [Up] or [Down] key to increase or decrease the
numbers.
•
When you are done changing the frequency reference,
press [PROG/ENT] key to finish setting the parameters.
•
The newly entered frequency reference is displayed.