LSIS 6731001500, User Manual

Page: 148 / 659

135
Learning Basic Features
•
Note that the motor can overheat or be damaged if excessive amount of DC braking is applied
to the motor or DC braking time is set too long.
•
DC braking is configured based on the motor’s rated current. To prevent overheating or
damaging motors, do not set the current value higher than the inverter’s rated current.
4.17.3 Free Run Stop
When the Operation command is off, the inverter output turns off, and the load stops due to
residual inertia.
Group Code Name LCD Display Parameter Setting Setting Range Unit
ADV 08 Stop Method Stop mode 2 Free-Run 0–4 -
Note that when there is high inertia on the output side and the motor is operating at high speed, the
load’s inertia will cause the motor to continue rotating even if the inverter output is blocked
ADV-17
ADV-14 ADV-15
ADV-16
Frequency
Voltage
Current
Run cmd
Frequency,
voltage
Run cmd