LSIS 6731001500, User Manual

Page: 319 / 659

306
Learning Advanced Features
Voltage and Current Analog Output Setting Details
5.47.2 Analog Pulse Output
Output item selection and pulse size adjustment can be made for the TO (Pulse Output) terminal.
Group Code Name LCD Display Parameter Setting Setting Range Unit
OUT
61 Pulse output setting TO Mode 0 Frequency 0–15 -
62 Pulse output gain TO Gain 100.0
-1000.0–
1000.0
-
63 Pulse output bias TO Bias 1000.0 -100.0–100.0 -
64 Pulse output filter TO Filter 5 0–10000 -
65
Pulse output constant
output2
TO Const % 0.0 0.0–100.0 %
66 Pulse output monitor TO Monitor 0.0 0–1000.0 %
Analog Pulse Output Setting Details
Code Description
OUT-62 TO Gain, OUT-
63 TO Bias
Adjusts output value and offset. If frequency is selected as an output, it will
operate as shown below.
C2
34567589:
;<=3456
C2 ><?8 @ C2 A?<B
The following graph illustrates that the pulse output (TO) changes depend
on OUT-62 (TO Gain) and OUT-63 (TO Bias) values. The Y-axis is an analog
output current (0–32 kHz), and X-axis is a % value of the output item.
For example, if the maximum frequency set at DRV-20 (Max Freq) is 60 Hz
and present output frequency is 30 Hz, then the x-axis value on the next
Monitor percentage (%) with 10 V as the standard.