LSIS 6731001500, User Manual, Page: 378 / 659

365
RS-485 Communication Features
7.3.4 Parameter Group for Data Transmission
By defining a parameter group for data transmission, the communication addresses registered in
the communication function group (COM) can be used in communication. Parameter group for
data transmission may be defined to transmit multiple parameters at once, into the
communication frame.
Group Code Name LCD Display Parameter Setting Setting range Unit
COM
31–38
Output
communication
address x
Para Status-x - 0000–FFFF Hex
51–58
Input
communication
address x
Para Control-x - 0000–FFFF Hex
Currently Registered CM Group Parameter
Note
When registering control parameters, register the operation speed (0h0005, 0h0380, 0h0381) and
operation command (0h0006, 0h0382) parameters at the end of a parameter control frame. For
example, when the parameter control frame has 5 parameter control items (Para Control - x), register
the operation speed at Para Control-4 and the operation command to Para Control-5.
Address Parameter Assigned content by bit
0h0100–0h0107
Status Parameter-1–
Status Parameter-8 Parameter communication code value registered at
COM-31–38 (Read-only)
0h0110–0h0117
Control Parameter-1–
Control Parameter-8 Parameter communication code value registered at
COM-51–58 (Read/Write access)