LSIS 6731001500, User Manual

Page: 330 / 659

317
Learning Advanced Features
Group Code Name LCD Display Parameter Setting Setting Range Unit
22
Monitor mode
display 2 Monitor
Line-2
2
Output
Current
- A
23
Monitor mode
display 3 Monitor
Line-3
3
Output
Voltage
- V
24 Monitor mode initialize
Mon Mode
Init
0 No - -
Operation State Monitor Setting Details
Code Description
CNF-20
AnyTime Para
Select items to display on the top-right side of the keypad screen. Choose the
parameter settings based on the information to be displayed. Codes CNF-20–23
share the same setting options as listed below.
Setting Function
0 Frequency On stop, displays the set frequency. During operation,
displays the actual output frequency (Hz).
1 Speed On stop, displays the set speed (rpm). During operation,
displays the actual operating speed (rpm).
2 Output
Current Displays output current.
3 Output
Voltage Displays output voltage.
4 Output Power Displays output power.
5 WHour
Counter Displays inverter power consumption.
6 DCLink
Voltage Displays DC link voltage within the inverter.
7 DI Status Displays input terminal status of the terminal block.
Starting from the right, displays P1–P8.
8 DO Status Displays output terminal status of the terminal block.
Starting from the right: Relay1, Relay2, and Q1.
9 V1 Monitor[V] Displays the input voltage value at terminal V1 (V).
10 V1 Monitor[%] Displays input voltage terminal V1 value as a
percentage. If -10 V, 0 V, +10 V is measured,
-100%, 0%, 100% will be displayed.
13 V2 Monitor[V] Displays input voltage terminal V2 value (V).
14 V2 Monitor[%] Displays input voltage terminal V2 value as a
percentage.
15 I2 Displays input current terminal I2 value (A).