LSIS 6731001500, User Manual

Page: 118 / 659

105
Learning Basic Features
Multi-step Frequency Setting Details
Code Description
BAS Group 50–56 Configure multi-step frequency 1–7.
IN-65–71 Px
Define
Choose the terminals to setup as multi-step inputs, and then set the relevant
codes (IN-65–71) to 7 (Speed-L), 8 (Speed-M), or 9 (Speed-H).
Provided that terminals P5, P6, and P7 have been set to Speed-L, Speed-M and
Speed-H respectively, the following multi-step operation will be available.
[An example of a multi-step operation]
Speed Fx/Rx P7 P6 P5
0 - - -
1 - -
2 - -
3 -
4 - -
5 -
6 -
7
IN-89 InCheck
Time
Set a time interval for the inverter to check for additional terminal block inputs
after receiving an input signal.
After adjusting IN-89 to 100 ms and an input signal is received at P6, the inverter
will search for inputs at other terminals for 100 ms, before proceeding to
accelerate or decelerate based on the configuration at P6.