LSIS 6731001500, User Manual

Page: 109 / 659

96
Learning Basic Features
Group Code Name LCD Display Parameter Setting Setting Range Unit
15
V1 output at
maximum voltage
(%)
V1- Perc y2 -100.00
-100.00–
0.00%
%
Rotational Directions for Different Voltage Inputs
Command /
Voltage Input
Input voltage
0–10 V -10–0 V
FWD Forward Reverse
REV Reverse Forward
-10–10 V Voltage Input Setting Details
Code Description
IN-12 V1- volt x1–
IN-15 V1- Perc y2
Sets the gradient level and off-set value of the output frequency in relation to
the input voltage. These codes are displayed only when IN-06 is set to ‘1
(bipolar)’.
As an example, if the minimum input voltage (at V1) is set to -2 (V) with 10%
output ratio, and the maximum voltage is set to -8 (V) with 80% output ratio
respectively, the output frequency will vary within the range of 6–48 Hz.
For details about the 0–+10 V analog inputs, refer to the code descriptions IN-08
V1 volt x1–IN-11 V1 Perc y2 on page
92
.