LSIS 6731001500, User Manual

Page: 132 / 659

119
Learning Basic Features
Acc/Dec Time Setup via Multi-function Terminals – Setting Details
Code Description
BAS-70–82
Acc Time 1–7
Set multi-step acceleration time1–7.
BAS-71–83
Dec Time 1–7
Set multi-step deceleration time1–7.
IN-65–71
Px Define (P1–P7)
Choose and configure the terminals to use for multi-step Acc/Dec time
inputs
Configuration Description
11 XCEL-L Acc/Dec command-L
12 XCEL-M Acc/Dec command-M
13 XCEL-H Acc/Dec command-H
Acc/Dec commands are recognized as binary code inputs and will control the
acceleration and deceleration based on parameter values set with BAS-70–82
and BAS-71–83.
If, for example, the P6 and P7 terminals are set as XCEL-L and XCEL-M
respectively, the following operation will be available.
Acc/Dec time P7 P6
0 - -
1 -
2 -
3
[Multi-function terminal P6, P7 configuration]
IN-89 In Check Time
Set the time for the inverter to check for other terminal block inputs. If IN-
89 is set to 100 ms and a signal is supplied to the P6 terminal, the inverter
searches for other inputs over the next 100 ms. When the time expires,
the Acc/Dec time will be set based on the input received at P6