339
Learning Protection Features
Code
Description
•
T_acc: Acceleration time to set frequency
•
T_steady: Constant speed operation time at set frequency
•
T_dec: Deceleration time to a frequency lower than constant speed
operation or the stop time from constant speed operation frequency
•
T_stop: Stop time until operation resumes
Do not set the braking resistor to exceed the resistor’s power rating. If overloaded; it can overheat
and cause a fire. When using a resistor with a heat sensor, the sensor output can be used as an
external trip signal for the inverter’s multi-function input.
6.2.6
Low Battery Voltage Warning
The H100 series has a battery low voltage warning feature. If the low battery voltage warning
function is set to ‘Yes,’ a low battery voltage warning occurs when the battery voltage is lower than
2 V (normal voltage is 3 V). Replace the battery when the low battery warning is displayed.
Group
Code
Name
LCD Display
Parameter Setting
Setting Range
Unit
PRT
90
Low battery
voltage detection
Low Battery
0
No
0
No
-
1
Yes
Low Battery Voltage Warning Detail Settings
Code
Description
PRT-90 Low Battery
The low battery voltage warning for RTC function installed in the inverter
can be enabled or disabled. The low battery voltage warning occurs when
the battery voltage is lower than 2 V.
Summary of Contents for 6731001500
