LSIS 6731001500, User Manual

Page: 152 / 659

139
Learning Basic Features
Frequency Limit Using Upper and Lower Limit Frequencies - Setting Details
Code Description
ADV-24 Freq Limit
The initial setting is ‘0 (No)’. Changing the setting to ‘1 (Yes)’ allows the setting
of frequencies between the lower limit frequency (ADV-25) and the upper
limit frequency (ADV-26).
ADV-25 Freq Limit Lo
ADV-26 Freq Limit Hi
Set an upper limit frequency to all speed unit parameters that are expressed
in Hz or rpm, except for the base frequency (DRV-18). Frequency cannot be
set higher.
•
When ADV-24 (Freq Limit) is set to ‘Yes,’ the frequency set at ADV-25 (Freq Limit Lo) is the
minimum frequency (Low Freq). If ADV-24 (Freq Limit) is set to ‘No,’ the frequency set at DRV-19
(Start Freq) becomes the minimum frequency.
•
When ADV-24 (Freq Limit) is set to ‘Yes,’ the frequency set at ADV-26 (Freq Limit Hi) is the
maximum frequency (High Freq). If ADV-24 (Freq Limit) is set to ‘No,’ the frequency set at DRV-20
(Max Freq) becomes the maximum frequency.