LSIS 6731001500, User Manual

Page: 249 / 659

236
Learning Advanced Features
<An example of Time Event>
Note
When repetitive frequency commands related to the frequency input command occur while the Time
Event function is performing, Time Event performs its function in the order of the frequency command
sources set in Freq Ref Src for DRV-07 (followed by Jog operation and multi-step acc/dec).
If a fault trip occurs during a time event operation, the inverter stops the operation and stays in a
trip state. When this happens, there are two options to resume the stopped operation:
•
Set PRT-08 (RST Restart) to ‘YES’ to allow the inverter to automatically restart after the trip
condition is released.
•
Refresh the setting at AP3-70 (Time Event En). Set AP3-70 to ‘Yes’ from ‘No’. If one of the input
terminals (IN-65–71 Px Define) is assigned to it, turn the switch off then turn it back on to
resume the time event operation.