LSIS 6731001500, User Manual

Page: 94 / 659

81
Learning Basic Features
Basic Tasks Description Ref.
block inputs
Command source
configuration for RS-485
communication
Configures the inverter to accept communication signals
from upper level controllers, such as PLCs or PCs.
p.109
Motor rotation control Configures the inverter to limit a motor’s rotation direction.
p.109
Automatic start-up at power-
on
Configures the inverter to start operating at power-on.
With this configuration, the inverter begins to run and the
motor accelerates as soon as power is supplied to the
inverter. To use automatic start-up configuration, the
operation command terminals at the terminal block must
be turned on.
p.111
Automatic restart after reset
of a fault trip condition
Configures the inverter to start operating when the
inverter is reset following a fault trip. In this configuration,
the inverter starts to run and the motor accelerates as soon
as the inverter is reset following a fault trip condition.
For automatic start-up configuration to work, the
operation command terminals at the terminal block must
be turned on.
p.113
Acc/Dec time configuration
based on the Max.
Frequency
Configures the acceleration and deceleration times for a
motor based on a defined maximum frequency.
p.114
Acc/Dec time configuration
based on the frequency
reference
Configures acceleration and deceleration times for a motor
based on a defined frequency reference.
p.117
Multi-stage Acc/Dec time
configuration using the
multi-function terminal Configures multi-stage acceleration and deceleration
times for a motor based on defined parameters for the
multi-function terminals.
p.118
Acc/Dec time transition
speed (frequency)
configuration Enables modification of acceleration and deceleration
gradients without configuring the multi-functional
terminals.
p.120
Acc/Dec pattern
configuration
Enables modification of the acceleration and deceleration
gradient patterns. Basic patterns to choose from include
linear and S-curve patterns.
p.121
Acc/Dec stop command
Stops the current acceleration or deceleration and controls
motor operation at a constant speed. Multi-function
terminals must be configured for this command.
p.123