LSIS 6731001500, User Manual

Page: 428 / 659

Table
of Functions
415
8 Table of Functions
This chapter lists all the function settings for the H100 series inverter. Use the references listed in
this document to set the parameters. If an entered set value is out of range, the messages that will
be displayed on the keypad are also provided in this chapter. In these situations, the [ENT] key will
not operate to program the inverter.
8.1 Drive Group (DRV)
Data in the following table will be displayed only when the related code has been selected.
*O: Write-enabled during operation, Δ: Write-enabled when operation stops, X: Write-
disabled
Code
Comm.
Address
Name LCD Display Setting Range Initial value
Prope
rty*
Ref.
00 -
Jump
Code
Jump Code 1–99 9 O
p.70
01 0h1101
Target
frequency Cmd
Frequency 0.00, Low Freq–
High Freq
0.00 O
p.88
02 0h1102
Keypad
run
direction
Keypad Run
Dir
0 Reverse
1 O
p.86
1 Forward
03 0h1103
Accelerati
on time
Acc Time 0.0–600.0 (sec)
20.0
0.75~
90kW
O
p.114
60.0
110~
250kW
100.0
315~
500kW
04 0h1104
Decelerati
on time
Dec Time 0.0–600.0 (sec)
30.0
0.75~
90kW
O
p.114
90.0
110~
250kW
150.0
315~
500kW