LSIS 6731001500, User Manual

Page: 234 / 659

221
Learning Advanced Features
Motor Capacity
(kW)
Rated
Current
(A) No-load
Current
(A) Rated Slip
Frequency
(Hz)
Stator
Resistance
(
Ω Ω Ω Ω
)
Leakage
Inductance
(mH)
400 V
110 203.5 48.8 1.00 0.0326 0.585
132 242.3 58.1 1.00 0.0272 0.488
160 290.5 69.7 1.00 0.0224 0.403
185 335.0 77.0 1.00 0.0210 0.380
220 405.0 93.1 1.00 0.1630 2.930
250 467.8 104.9 1.00 0.1455 2.615
315 604.0 132.8 1.00 0.1140 2.040
355 687.8 146.4 1.00 0.1020 1.820
400 782.0 161.2 1.00 0.0906 1.616
500 985.3 206.2 1.00 0.0700 1.330
Auto Tuning Parameter Setting Details
Code Description
DRV-14 Motor Capacity
Sets the motor capacity to be used. The maximum motor capacity is
limited by the inverter capacity and the keypad only displays the
inverter capacity.
BAS-20 Auto Tuning
Select an auto tuning type and run it. Select one of the options and
then press the [ENT] key to run the auto tuning.
Setting Function
0 None Auto tuning function is disabled. Also, if you
select one of the auto tuning options and run it,
the parameter value will revert back to ‘0’ when
the auto tuning is complete.
1 All
(rotating
type) Measures all motor parameters while the motor
is rotating, including stator resistance (Rs), no-
load current (Noload Curr), rotor time constant
(Tr), etc. Since the motor is rotating while the
parameters are being measured, if the load is
connected to the motor spindle, the parameters
may not be measured accurately. For accurate
measurements, remove the load attached to the
motor spindle.