LSIS 6731001500, User Manual

Page: 167 / 659

154
Learning Advanced Features
Code Description
DRV-11 JOG Frequency Set the operation frequency.
DRV-12 JOG Acc Time Set the acceleration speed.
DRV-13 JOG Dec Time Set the deceleration speed.
If a signal is entered at the jog terminal while an FX operation command is on, the operation
frequency changes to the jog frequency and the jog operation begins.
5.2.2 Jog Operation 2-Forward/Reverse Jog by Multi-function Terminal
For jog operation 1, an operation command must be entered to start operation, but while using
jog operation 2, a terminal that is set for a forward or reverse jog also starts an operation. The
priorities for frequency, Acc/Dec time and terminal block input during operation in relation to
other operating modes (Dwell, 3-wire, up/down, etc.) are identical to jog operation 1. If a different
operation command is entered during a jog operation, it is ignored and the operation maintains
the jog frequency.
Group Code Name LCD Display Parameter setting Setting Range Unit
DRV
11 Jog frequency
JOG
Frequency
10.00
0.00, Low Freq–
High Freq
Hz
12
Jog operation
acceleration time JOG Acc
Time
20.00 0.00–600.00 sec
13
Operation
deceleration time JOG Dec
Time
30.00 0.00–600.00 sec