IAI R-unit RSEL, Instruction Manual, Page: 516 / 844

Chapter 9 Special Functions
9.5 Vision System Interface Function
9-24
ME0392-4C
No. Parameter name
Setting at
Delivery Input range Unit
Remarks
124 Network attribute5 0H
0H to
FFFFFFFFH
EtherNet TCP/IP message communication attribute
EtherNet client/server type
(0: Not in use
1: Client (Automatic assignment of own port
number)
2: System Reservation
3: Server (Specification of own port number))
* Note: Number of clients that can be
connected simultaneously to one
server port channel = 1
Bits 0 to 3: IAI protocol B/TCP (MANU mode)
Bits 4 to 7: IAI protocol B/TCP (AUTO mode)
Bits 8 to 11: Channel 31 opened to user
Bits 12 to 15: Channel 32 opened to user
Bits 16 to 19: Channel 33 opened to user
Bits 20 to 23: Channel 34 opened to user
* If the parameter settings for own port number,
client/server type, IP address of connection
destination and port number of connection
destination do not match completely between the
IAI protocol B/TCP MANU and AUTO modes, the
connection will be cut off when the MANU/AUTO
mode is switched.
127 Network attribute8 5050214H
0H to
FFFFFFFFH
EtherNet TCP/IP message communication attribute
Bits 0 to 7: CONNECT_TIMEOUT
(Change is prohibited)
(Setting of “0” is prohibited) [s]
Bits 8 to 15: Connection retry interval
(IAI protocol B/TCP) [s]
Bits 16 to 23: Send timeout value [s]
Bits 24 to 31: IAI protocol B-SIO non-communication
check timer setting [s]
(IAI protocol B/TCP connection trigger)
129 Network attribute10 0H
0H to
FFFFFFFFH
EtherNet operation requirement
Bits 0 to 3: System Reservation
Bits 4 to 7: TCP/IP message communication
(0: Not in use, 1: Use)
Bits 8 to 31: Reserved (Operation requirement)
145 Channel 31 opened to user
(TCP/IP): Own port number
64512
1025 to
65535
* Important note: Always set a unique number for
each port number.
(Duplication of port numbers is permitted only in
the IAI protocol B/TCP MANU/AUTO modes.)
146 Channel 32 opened to user
(TCP/IP): Own port number
64513
1025 to
65535
* Important note: Always set a unique number for
each port number.
(Duplication of port numbers is permitted only in
the IAI protocol B/TCP MANU/AUTO modes.)
147 Channel 33 opened to user
(TCP/IP): Own port number
64514
1025 to
65535
* Important note: Always set a unique number for
each port number.
(Duplication of port numbers is permitted only in
the IAI protocol B/TCP MANU/AUTO modes.)
148 Channel 34 opened to user
(TCP/IP): Own port number
64515
1025 to
65535
* Important note: Always set a unique number for
each port number.
(Duplication of port numbers is permitted only in
the IAI protocol B/TCP MANU/AUTO modes.)
160 Vision System I/F connected IP
address (H)
192 0 to 255 *Setting of “0” and “127” is prohibited.
161 Vision System I/F connected IP
address (MH)
168 0 to 255
162 Vision System I/F connected IP
address (ML)
0 0 to 255
163 Vision System I/F connected IP
address (L)
102 0 to 254 *Setting of “0” and “255” is prohibited.
164 Vision System I/F Connected
Port Number
64613 0 to 65535
* Vision System I/F is dedicated for the
specifications of the client on IAI controller side
(Self-Port Number Automatic Assignment)
* Setting of 0 forbidden
170 EtherNet I/F
Own MAC address (H)
0H
Reference only
(HEX)
Only lower two bytes are valid.
171 EtherNet I/F
Own MAC address (L)
0H
Reference only
(HEX)
172 EtherNet I/F
Own IP address (H)
192 1 to 255 *Setting of “0” and “127” is prohibited.