IAI R-unit RSEL, Instruction Manual, Page: 326 / 844

Chapter 6 Field Network, PIO, SIO
6.1 Interface Specifications
6-8
ME0392-4C
(5) EtherNet/IP connection type
● EtherNet/IP interface specifications
Item Description
Applicable protocol CIP, TCP/IP
Device type Generic Device
IP address
1.0.0.1 to 254.255.255.254 (*1)
(Software setting by I/O parameters)
Port Number
2222 (UDP) (*2)
44818 (TCP/UDP) (*2)
Communication speed 10/100Mbps (Software setting by I/O parameters)
Communication mode
10BASE-T/100BASE-TX (Half duplex / Full duplex)
(Software setting by I/O parameters)
Cable Category 5 or higher
(*3)
Connector RJ45×1
*1: As 1st Octet = 127 or 4th Octet = 0 and 225 are reserved addresses, they are not available for use.
*2: It is the port numbers to be used in EtherNet/IP.
*3: STP cable is recommended
● I/O Slot Status LED
LED name Color Status Description
NS
Green
Light ON Online status, In the normal communication
Blinking Online status, No connection
Orange
Light ON IP addresses duplicated
Critical link error
Blinking Connection timeout
－
Light
OFF
Power not supplied
IP address setting not established
NS
Green
Light ON Normal operation
Blinking Configuration setting not established, incomplete or trial run
needed
Orange
Light ON Error impossible to recover
Blinking Error possible to recover
－
Light
OFF
Power not supplied
NS
MS