IAI R-unit RSEL, Instruction Manual, Page: 201 / 844

Chapter 3 Specifications for each unit
3.7 Simple Absolute Unit
3-116
ME0392-4C
3.7.2 Model code
(1) How to Read the Model Number
The simple absolute unit models are as follows.
1 simple absolute unit is required for each actuator axis.
Also, the applicable driver units should be the 24 pulse motor type (RCON-PC) and the 24V
AC servo-motor type (RCON-AC) only.
A cable (model: CB-ADPC-MPA005, length 50 cm) is included for connection to the driver unit.
Cables of lengths other than 50 cm must be prepared separately as needed. The cable length
should be selected based on the driver unit and simple absolute unit installation positions.
Simple absolute unit model
RCON – A B U –
Motor type
Ｐ
Stepper motor type
Ａ
AC servo motor type
Simple Absolute Unit
for AC servo motor
(Model: RCON-ABU-A)
Simple Absolute Unit
for stepper motor
(Model: RCON-ABU-P)
Model Number
CB-ADPC- MPA□□□/CB -ADPC- MPA□□□ -RB
3.7 Simple Absolute Unit
ME0392-4C
3-117
(2) How to read the model nameplate
Mark Explanation of Mark
Use IAI specified cables only.
[Nameplate Location]
↓ Serial number
Model
number →
Model number
→
Serial number
→
Caution Mark