IAI R-unit RSEL, Instruction Manual, Page: 109 / 844

Chapter 3 Specifications for each unit
3.1 SEL Unit, Terminal Unit
3-24
ME0392-4C
● EtherNet/IP
Connector type 8P8C modular c onnector
Cable recommended Enhanced Category 5 or above
LED
name
Color Status Content
MS
Green
Light ON
In operation condition and under control of scanner
(master)
Blinking
Setting of construction information incomplete, or
scanner (master) in idling condition
Orange
Light ON Fatal malfunction (exception condition or critical error)
Blinking Light malfunction possible to recover
Green/orange Light OFF Turned off.
NS
Green
Light ON
Online status
(Connection established on one or more)
Blinking Online status (connection not being established)
Orange
Light ON Critical error such as IP address duplication
Blinking Timeout in connection on one or more
Green/orange Light OFF Turned off, IP address not set
NS
MS
3.1 SEL Unit, Terminal Unit
ME0392-4C
3-25
● PROFIBUS-DP
Connector type D-sub Connector 9-pin (Socket)
Pin No. Signal name Description
1 NC Not connected
2 NC Not connected
3 B-Line Signal line B (RS-485)
4 RTS Transmission request
5 GND Signal GND (insulation)
6 +5V +5 V output (isolated)
7 NC Not connected
8 A-Line Signal line A (RS-485)
9 NC Not connected
Housing Shield
Cable s hield
(Connected with FG inside controller)
LED name Color Status Content
MS
Green
Light ON Initialization complete
Blinking Initialization complete (diagnosis event found)
Orange Light ON Error occurrence (Exception error)
NS
Green
Light ON Online status
Blinking Online status (clear status)
Orange Light ON Error occurrence
( Parameter error, PROFIBUS Configuration information error )
1
5
NS
MS
6
9