IAI R-unit RSEL, Instruction Manual, Page: 135 / 844

Chapter 3 Specifications for each unit
3.3 200V Power Supply Unit, for 200V Terminal Unit
3-50
ME0392-4C
3.3.2 Model code
(1) How to Read the Model Number
[200V power supply unit]
RCON – PS2 – 3 – .
Type Power supply voltage Option
[Terminal Unit for 200V]
RCON – GW – TRS
TRN Without terminal unit
PS2
200 V Power
supply unit
3
3-Phase /
Single-Phase 200V
Fan unit
(Model : RCON-FU)
Fan Unit for 200V driver unit
(Model : RCON-FUH)
200V Driver unit
(Model : RCON-SC-1)
Terminal Unit for 200V
(Model : RCON-GW-TRS)
200V Power supply unit
(Model : RCON-PS2-3)
* The maximum number of
connectable units is one unit.
3.3 200V Power Supply Unit, for 200V Terminal Unit
ME0392-4C
3-51
(2) How to read the model nameplate
[200V Power Supply Unit]
Model number
→
Serial number
→
Caution Mark
High Temperature
Caution Mark
Electric Shock
Caution Mark
Type →
* This design is after being certified with UL/CE.
Mark Explanation of Mark
Use IAI specified cables only.
Where residual-current-operated protective device (RCD) is used for protection in case
of direct or indirect contact, only RCD of Type B is allowed on the supply side of this
Electrotonic Equipment (EE).
Do not touch terminals within 10 minutes after disconnect the power.
Risk of electric shock.
Do not touch product when power is ON. Risk of burn.
[Nameplate Location]
↑
Serial number