IAI R-unit RSEL, Instruction Manual, Page: 378 / 844

Chapter 6 Field Network, PIO, SIO
6.3 Parameter Configuration
6-60
ME0392-4C
6.3.4 Example of use of each network and parameter
[1] CC-Link only
It is the setting when CC-Link is to be used for 16 points of each input and output from No. 0
and from No. 300 of the input and output ports.
No. Parameter Name
Setting at
Delivery
Set
Value
Unit Remarks
1 I/O port assignment type 0 0
0: Fixed assignment
1: Automatic assignment
14
Number of Ports Used for
I/O1 Fieldbus Remote Input
64 16 Multiple of 8
15
Number of Ports Used for
I/O1 Fieldbus Remote Output
64 16 Multiple of 8
16
I/O1 fix-allocated input port
start No.
0 0
0 + (Multiple of 8) (0 to 299)
1,000 + (Multiple of 8) (1,000 to 3,999)
(Invalid if a negative value is set.)
17
I/O1 fix-allocated output port
start No.
300 300
300 + (multiple of 8) (300 to 599)
4,000 + (multiple of 8) (4,000 to 6,999)
(Invalid if a negative value is set.)
18 I/O1 error monitor 1 1
0: Do not monitor
1: Monitor
* Some exceptions apply.
120 Network attribute 1 64 10 01H Optional
Bits4-11: I/O1 Fieldbus link error
confirmation timer value (10 ms)
Bits28-31: Input Port Data Select in I/O1 Fieldbus
Link Error (0: Clear, 1: Hold)
121 Network attribute 2 C80000H Optional
Bits 16-27: Link timeout value in Fieldbus
initialization (100 ms)
225 I/O controller 1H 1H
Bits 0-7: Type of Network I/F Module Control 1
(0H : Not mounted,
1H : CC-Link,
2H : DeviceNet,
3H : PROFIBUS-DP,
6H : EtherCAT,
7H : EtherNet/IP,
9H : PIO,
AH : PROFINET IO,
DH : CC-Link IE)
226 I/O1 Fieldbus Node Address 1 Optional
Settable Range
1 to 64
227 I/O1 Fieldbus communication
speed
4 Optional
0: 156kbps, 1: 625kbps, 2: 2.5Mbps, 3: 5Mbps,
4: 10Mbps
Input port No.0 to 15
Output port No.300 to 315