Holip HLP-A100 Series, Operating Manual

Page: 72 / 187

HLP-A100 Series
HLP-A100 Series Operating Manual -
65
-
C01.62 Function Description Range Unit Default Setting
Slip Compensation -400~399 % 100
Function: Dynamically adjust the output frequency of the motor,
maintain the motor approaching a constant speed, and doesn’t
vary with load changes.
Description of Choice: This function is only active when par. C01.00,
Configuration Mode, is set to Speed Open Loop [0], and when
par. C01.01, Motor Control Principle, is set to VVC+ [1]. Slip
compensation is calculated automatically based on rated motor
speed, nM,N.
C01.61 Function Description Range Unit Default Setting
High Speed Load
Compensation
0~199 % 100
Function: Use this parameter to compensate voltage in relation to load
when motor runs at high speed.
Description of Choice: Enter a percentage value to compensate voltage
when motor needs running at low speed. Change-over point is
automatically calculated based on motor size.