Holip HLP-A100 Series, Operating Manual

Page: 119 / 187

HLP-A100 Series Operating Manual
HLP-A100 Series
-
112
-
[25] Comparator 3, output of comparator 3 is used in logic rules;
[26] Logic rule 0, result of logic rule 0 is used in logic rules;
[27] Logic rule 1, result of logic rule 1 is used in logic rules;
[28] Logic rule 2, result of logic rule 2 is used in logic rules;
[29] Logic rule 3, result of logic rule 3 is used in logic rules;
[30] Simple PLC Time-out 0, result of timer 0 is used in logic rules;
[31] Simple PLC Time-out 1, result of timer 1 is used in logic rules;
[32] Simple PLC Time-out 2, result of timer 2 is used in logic rules;
[33] Digital input FOR, input value entered via digital input FOR is
used in logic rules;
[34] Digital input REV, input value entered via digital input REV is
used in logic rules;
[35] Digital input DI1, input value entered via digital input DI1 is used
in logic rules;
[36] Digital input DI2, input value entered via digital input DI2 is
used in logic rules;
[37] Digital input DI3, input value entered via digital input DI3 is
used in logic rules;
[38] Digital input DI4, input value entered via digital input DI4 is
used in logic rules;
[39] Start command, if the drive starts in any way, this event is “true”;
[40] Drive stopped, if the drive stops in any way, this event is “true”;
[50] Simple PLC Time-out 3, result of timer 3 is used in logic rules;
[51] Simple PLC Time-out 4, result of timer 4 is used in logic rules;
[52] Simple PLC Time-out 5, result of timer 5 is used in logic rules;
[53] Simple PLC Time-out 6, result of timer 6 is used in logic rules;
[54] Simple PLC Time-out 7, result of timer 7 is used in logic rules;
Function: Start Simple PLC.
C13.02 Function Description Range Unit Default Setting
Stop Event 0~54 40
Option: Same to C13.01.
Function: Stop Simple PLC.
C13.03 Function Description Range Unit Default Setting
Reset simple PLC 0~1 0
Option: [0] Do not reset, Simple PLC doesn’t reset;
[1] Reset Simple PLC, reset Simple PLC, references in parameter
group C13 will all be restored to factory setting;