Holip HLP-A100 Series, Operating Manual

Page: 131 / 187

HLP-A100 Series Operating Manual
HLP-A100 Series
-
124
-
C15.05 Function Description Range Unit Default Setting
Over Voltages 0~65535
Function: view the number of drive overvoltages that have occurred. This
parameter can’t be reset.
C15.06 Function Description Range Unit Default Setting
Reset Kwh Counter 0~1
Option: [0] Do not reset;
[1] Reset counter, Counter is reset;
Attention: This parameter can’t be set via local bus.
C15.07 Function Description Range Unit Default Setting
Reset Running Hours
Counter
0~1
Option: [0] Do not reset;
[1] Reset conuter Counter is reset;
Attention: This parameter can not be set via local bus.
C15.30 Function Description Range Unit Default Setting
Fault Log:Error Code 0~255
Function: View the error code, and look up its meaning in chapter 10. This
parameter group contains a fault log showing reasons for the ten
latest trips.
C15.3* Fault Log
C15.31 Function Description Range Unit Default Setting
Internal Fault Reason -32767~32767
Function: This parameter contains internal fault reasons, mostly used in
combination with alarm 38.
C15.4*
、
C15.5*Drive Identification
This parameter contains read only information about the hardware and
software configuration of the frequency converter.
Function: View the number of the drive temperature faults that have
occurred. This parameter can’t be reset.