Holip HLP-A100 Series, Operating Manual

Page: 143 / 187

HLP-A100 Series Operating Manual
HLP-A100 Series
-
136
-
C16.93 Function Description Range Unit
Default
Setting
Warning Word 2 0~0x7FFFFFFFUF
Function: View Warning Word 2 sent via serial communication port in hex
code.
C25.00 Function Description Range Unit Default Setting
Cascade Mode 0~1 0
Option: [0] Normal Cascade, Applicable for general cascade;
[1] Water Level Control, Standby pressure will be carried out to use
when pool level exceeds the upper or lower water level limit.
C25.03 Function Description Range Unit Default Setting
Fixed speed Pump Number 0~2 0
Function: In cascade controller, one inverter can control multiple pumps.
Through the output switch signal, the auxiliary pump are assigned
to start and stop.
C25.0* Cascade Control Mode
C25.10 Function Description Range Unit Default Setting
Multi Pressure Selection 0~1 0
Option: [0]Disable;
[1] Multi pressure;
Function: In cascade, the pressure reference can be differently at different
time to meet various application requirments. If this parameter is
set to “0”, the target pressure is the pressure setting for T0 period.
C25.11 Function Description Range Unit Default Setting
Preset Time 0.00~23.59 h 0.00
Option: Choose different pressure reference at different times in cascade
control systems, the active time need to be set.
Attention: If the FC powers off, this parameter needs setting again.
C25.1* Pressure Setting
6.14 Parameter Group 25: App. Functions Cascade