HLP-A100 Series
HLP-A100 Series Operating Manual
-
3
-
correct. Otherwise it will cause damages of the inverter when the
power is applied to it.
● The terminal of
must be grounded separately and never
connected to N-line. Otherwise it will easily cause the protection
or errors of the inverter.
● Do not dissemble or modify any internal connecting cord, wiring
or component of the inverter by yourself.
● Never remodel it or exchange control boards and components by
yourself. It may expose you to an electrical shock or explosion,
etc.
● Keep the inverter from the reach of children or persons not
concerned.
Caution
● Do not measure the signals on circuit boards while the inverter is
running to avoid danger.
● The drive has been optimized before sold. Please make proper
adjustments according to the desired functions.
● Do consider the vibration, noise and the speed limit of the motor
bearings and the mechanical devices.
Danger
● Do not plug the connectors of the inverter during the power up
to avoid any surge into the main control board due to plugging,
which might cause the damage of the inverter.
● Always have the protective cover in place before the power up to
avoid electrical shock injury.
Danger
● Never connect or disconnect the motor set while the inverter is in
running. Otherwise it will cause over-current trip and even burn
up the main circuit of the inverter.
1.2 During the power-up
1.3 During the operation
Summary of Contents for HLP-A100 Series
Page 1: ......
Page 2: ...HLP A100 Series Operating Manual...
Page 3: ......
Page 7: ...HLP A100 Series Operating Manual HLP A100 Series 6...
