Holip HLP-A100 Series, Operating Manual

Page: 114 / 187

HLP-A100 Series
HLP-A100 Series Operating Manual -
107
-
C08.06 Function Description Range Unit Default Setting
Reset Control Word
Time Out
0~1 0
Option: [0] No f unction Control word timeout is not reset;
[1] Do reset Control word timeout is reset;
Function: Resetting control word timeout will remove any timeout f unction;
C08.30 Function Description Range Unit Default Setting
Protocol 0~6 0
Option: [0] FC;
[2] MODBUS RTU;
[6]MODBUS ASCII;
Function: Select the protocol to be used.
C08.31 Function Description Range Unit Default Setting
Address 0~247 1
Function: Select the address for the bus. FC-bus range is 1-126, and MODBUS
RTU range is 1-247.
C08.32 Function Description Range Unit Default Setting
FC Port Baud Rate 0~9 bit/s 2
Option: [0] 2400;
[1] 4800;
[2] 9600;
[3] 19200;
[4] 38400;
[5]Reserved;
[6]Reserved;
[7]Reserved;
[8]Reserved;
[9]Reserved;
Function: Select baud rate for FC Port.
C08.3* FC Port Setting
resumes;
[5] Stop and trip, Stop motor and restart f requency in order to restart
via either LCP or Digital input .
Function: Select action to be taken in case of timeout.