Holip HLP-A100 Series, Operating Manual

Page: 67 / 187

HLP-A100 Series Operating Manual
HLP-A100 Series
-
60
-
Function: Choose suitable torque characteristics, it is possible to run low
energy consuming, as well as high torque applications.
*C01.07 Function Description Range Unit Default Setting
Application
configuration Mode
0~3 0
Option: [0] No function;
[1] Wobble function,see parameter group C30.*;
[2] Cascade control,see parameter group C25.*;
[3] Winder function (reserved);
Function: This parameter enables a choice of a configuration setting
that fits different applications. Wobble function is only valid
under speed open loop, in other control mode, wobble function
will be automatically shut down. If wobble function is selected,
parameterC03.00 will be set to “0”.
*C01.20 Function Description Range Unit Default Setting
Motor Power Dep. Motor date KW *
Function: Select the KW value that corresponds to the rated power of the
motor.
Description of choice: Factory settings depend on the inverter size, there
is one or two undersize or one oversize in comparison with
factory setting.
Attention: Changing the value of this parameter affects the setting of
C01.22-C01.25 and C01.30-C01.35.
*C01.22 Function Description Range Unit Default Setting
Motor Voltage 50~1000 V *
Function: Select a value that equals the nameplate data on the motor.
Description of choice: Default setting depends on the inverter size.
In this parameter group, enter correct motor nameplate data (power,
voltage, frequency, current and speed). And then run AMA to obtain the
best motor data which will be stored in C01.3*.
Attention: Data of Parameter group C01.2* can not be changed when
motor is running.
C01.2* Motor Date