Holip HLP-A100 Series, Operating Manual

Page: 69 / 187

HLP-A100 Series Operating Manual
HLP-A100 Series
-
62
-
*C01.35 Function Description Range Unit Default Setting
Main Reactance(Hh) Dep.motor data Ω *
*C01.30 Function Description Range Unit Default Setting
Stator resistance(R
S
) Dep.motor data Ω *
Function: Set stator resistance value. Enter the value from a motor data
sheet or perform an AMA on a cold motor.
Description of the choice: Depending on motor data.
*C01.39 Function Description Range Unit Default Setting
Motor Poles 2~100 P 4
Function: Enter the motor poles from the nameplate data.
Description of the choice: Depending on motor data.
*C01.42 Function Description Range Unit Default Setting
Motor Cable Length 0~150 m 50
Function: Enter the motor cable length connected between the motor and
the frequency converter.
Description of the choice: Set correct cable length can suppress noises
resulted from the motor.
*C01.33 Function Description Range Unit Default Setting
Stator leakage
reactance
Dep.motor data Ω *
Function: Set stator leakage reactance value. Enter the value from a
motor data sheet or perform an AMA on a cold motor. The
default setting is calculated by the drive from motor nameplate
data.
Description of the choice: Depending on motor data.
Function: Set the main reactance value. Enter the value from a motor
data sheet or perform an AMA on a cold motor. The default
setting is calculated by the drive from motor nameplate data.
Description of the choice: Depending on motor data.
This parameter can not be changed while motor is running.
C01.3* Adv.Motor Data
C01.4* Motor Cable Length