Holip HLP-A100 Series, Operating Manual

Page: 65 / 187

HLP-A100 Series Operating Manual
HLP-A100 Series
-
58
-
C00.41 Function Description Range Unit Default Setting
[OFF/RESET] Key on
LCP
0~2 1
Option: [0] Disabled, OFF/RESET key has no function;
[1] Enabled, OFF/RESET key stop signal and reset of any fault;
[2] Enabled reset only, reset only (fault), stop (off) function is
disabled;
Description of the choice: When OFF/RESET key is chosen, the
frequency converter stops with a normal stop ramp; it can only
be started by pressing either hand or auto key on the LCP.
C00.42 Function Description Range Unit Default Setting
[AUTO] Key on LCP 0~1 1
Option: [0] Disabled, Auto-on key has no function;
[1] Enabled, Auto-on key is functional;
Description of the choice: In auto-mode, the frequency can be remote
controlled (bus/digital).
*C00.51 Function Description Range Unit Default Setting
Set-up Copy 1~9 0
Option: [0] No copy;
[1] Copy from set-up 1;
[2] Copy from set-up 2;
[9] Copy from factory setting;
Function: Copy parameters settings from selected set-up to edited set-up
(C0.11).
Attention: When selected set-up is same to the edited set-up, copy
function doesn’t work; both control panel and parameter
database are locked while copying.
C00.5* Copy/Save
C00.60 Function Description Range Unit Default Setting
Menu Password 0~1
Option: [0] Disabled;
[1]Enabled, none of parameter can be changed except this;
Function: This feature used to prevent non-commissioning person to
C00.6* Protection