Holip HLP-A100 Series, Operating Manual

Page: 8 / 187

HLP-A100 Series
HLP-A100 Series Operating Manual -
1
-
Caution
● Check to be sure that the voltage of the main circuit AC power
supply matches the input voltage of the inverter.
● Install the inverter in a safe location, avoiding high temperature,
direct sunlight, humid air or water.
● The inverter can only be used at the places accredited by our
company. Any unauthorized working environment may have the
risks of fire, gas explosion, electric shock and other incidents.
● If more than one drive installed on the same control cabinet, make
additional cooling fan, so that the inside temperature is lower than
40
℃
，
in order to prevent overheating or fire occurs.
● It will affect the service life of the inverter if a contactor is
Introduction
Thank you for purchasing and using the general-purpose vector
inverter of HLP-A100 series.
Please read caref ully the operation manual before putting the inverter
to use so as to correctly install and operate the inverter, give f ull play to its
f unctions and ensure the safety. Please keep the operation manual handy for
f uture reference, maintenance, inspection and repair.
Due to the inverter of a kind of power electronics product it must be
installed, tested and adjusted with specialized electrical engineering workers.
The marks of (Danger)
、
(Caution) and other symbols in
the manual remind you of the safety and prevention cautions during
the handling, installation, running and inspection. Please follow these
instructions to make sure the safe use of the inverter. In case of any doubt
please contact our local agent for consultation. Our professional persons are
willing and ready to serve you.
The manual is subject to change without notice.
Chapter 1 Safety Precautions
1.1 Before power-up
Caution
Indicates misuse may damage the inverter or
mechanical system .
Danger
Misuse may result in casualty.