Holip HLP-A100 Series, Operating Manual

Page: 113 / 187

HLP-A100 Series Operating Manual
HLP-A100 Series
-
106
-
C08.03 Function Description Range Unit Default Setting
Control Word Time Out
Time
0.1~6500.0 s 1.0
C07.42 Function Description Range Unit Default Setting
Process PI Output High -100-100 % 100
Function: Process PI controller output High limit, 100% corresponds to C04.19.
C08.01 Function Description Range Unit Default Setting
Control mode 0~2 0
Option: [0] Digital and control word , use both digital input and control word
as control;
[1] Digital only, use digital input as control;
[2] Control word only, use control word only as control;
C08.02 Function Description Range Unit Default Setting
Control Word Source 0~1 1
Option: [0] None, control word is inactive;
[1] FC RS485 , select local bus as control word source.
Function: This f unction is disabled, when the reference is set to 0. If the
reference is not set to 0, the control word timeout time is not
exceeded, and the serial communication is still innormal, action set
in C08.04 will be carried out.
C08.04 Function Description Range Unit Default Setting
Contol Word Time Out
Time
0~5 0
Option: [0] Off, No f unction;
[1] Freeze output, Freeze output until communication resumes.
[2] Stop, Stop with auto restart when communication resumes;
[3] Jogging, Run motor at jog f requency until communication
resumes;
[4] Max. speed, Run motor at max.f requency until communication
C08.0* Comm. General Settings
6.9 Parameter Group 08: Comm. and Options