Hitachi ZA3000 Series, Instruction Manual

Page: 89 / 522

4.1 Data Table
4 - 2
In this window, multiple measurement results can be opened.
When the Data Process window automatically appears at the
end of measurement (or at closure of a sequence), the result of
the relevant measurement is displayed. However, if a new
measurement is carried out or a result file is opened
subsequently, the target data may not be displayed at the
foremost position. In such a case, click the [Window] menu.
Among the displayed file names, click the desired one to display
the data.
Fig. 4-2 Selection of Result File
4.1 Data Table
In Data Table, the numeric data of each sample is listed and
various data editing operations can be performed.
There are 3 display formats of measurement result (Data
Tables); [Table of Each Element], [Detail Table] and
[Concentration Table]. Each table is selectable by clicking the
down arrow at the right of Data Table.
The sample IDs displayed in a data table are only those of STD
and UNK in case of the simple working curve method described
in Section 3, but the sample IDs listed in the table below may be
indicated when utilizing various measurement methods.
(There are sample ID codes to be indicated only when the
autosampler has been used.)