5.14 Insertion and Remeasurement of Sample
5 - 42
5.14 Insertion and Remeasurement of Sample
While pausing measurement, you can add samples or
remeasure already measured samples.
In order to pause a measurement, use the Pause button.
Refer to Section 3.9.2
NOTE
: If the measurement is paused by Cancel button, some
samples may be left in the cuvette. Resume the
measurement after running the temperature program
once or removing samples in the cuvette through the
maximum heat by removing the autosampler tray.
(1) With the current measurement kept in pause, click the [Edit
Sample Table] button in the Monitor window.
Fig. 5-37 [Edit Sample Table] Button
(2) The Edit Sample Table window opens. Then click the
[Sample Name/Conc. Correct.] tab.
A sample after measurement is indicated in blue characters
and a sample before measurement is indicated in black
characters (Fig. 5-38). Select a sample before
measurement by clicking its No. (entire row turns blue) and
click the [Insert UNK] button. Then, a sample will be
added above that row (Fig. 5-39).
5.14.1 Insertion
of
Samples
Summary of Contents for ZA3000 Series
Page 423: ...9 3 5 9 11 Fig 9 14 Diagnosis Log Dialog Box ...
Page 449: ...10 5 Reflecting on Analysis Conditions 10 24 Fig 10 16 Method Window Unmark the checkbox ...
Page 455: ...INDEX 4 V Verify 3 34 W Working curve graph 4 1 Wavelength accuracy 9 1 ...
Page 456: ...INSTRUCTION MANUAL 7J1 9027 000 Ver 1 February 2016 MODEL HFS 4 HYDRIDE FORMATION SYSTEM ...
