Hitachi ZA3000 Series, Instruction Manual

Page: 54 / 522

3.1.7
3 - 15

UNK Unit
Input the unit of unknown sample concentration. If the
dilution factor is entered, the unit may be different from
that for the STD sample. Carefully check before entering
the factor. Input will be accepted in up to 6 characters.
Even if this input is omitted, measurement can be
performed. Also, input can be changed after
measurement.
(1) Click the [Sample Table] button (<6> in Fig. 3-1) to display
the Sample Table window (Fig. 3-7). If [Sample
Name/Conc. Correct.] display is not contained in this
window, the [Sample Name/Conc. Correct.] tab (<1> in Fig.
3-7) must be clicked for the display.
Fig. 3-7 Sample Table Window
(2)
Setting of Number of Samples
Enter a number of unknown samples in the [No. of UNK]
column, and click the [Reset] button or [Change] button.
To add or delete unknown samples, use the [Insert UNK]
button or [Delete UNK] button in the [Edit] frame.

[Reset] button
Used to set the [No. of UNK] of [Number of Samples].
As many [No.] lists in the sample table as the number of
unknown samples entered are created.
3.1.7 Setting Sample
Table
<1>