3.1
3 - 1
3. MEASUREMENT WITH CONDITIONS INPUT
The input of measurement conditions and measurement
procedure are described here using as an example analysis by
the working curve method with the autosampler.
3.1 Generation of Measurement Conditions
The procedure for creating new measurement conditions is
described next. This procedure should be observed in the
following cases.
When changing the measurement conditions used at auto-
start
When changing the measurement conditions read out from
the existing file
Reference: 2.3.4 Opening a Files
For creating measurement conditions, open the Method window
(Fig. 3-1), then open the windows in succession by clicking the
buttons on the toolbar from left to right, and enter your settings.
For changing over the windows for entry, either click the
respective buttons or use the Previous and Next buttons
toward the right end of the toolbar. To cancel an item that has
been set or changed on an opened window, click the cancel
button on the toolbar.
Fig. 3-1 Method Window
Enlarge the icon in the tool bar
<1>
<12>
<13>
<11>
<2> <3> <4> <5> <6> <7> <8> <9>
<10>
<14>
Summary of Contents for ZA3000 Series
Page 423: ...9 3 5 9 11 Fig 9 14 Diagnosis Log Dialog Box ...
Page 449: ...10 5 Reflecting on Analysis Conditions 10 24 Fig 10 16 Method Window Unmark the checkbox ...
Page 455: ...INDEX 4 V Verify 3 34 W Working curve graph 4 1 Wavelength accuracy 9 1 ...
Page 456: ...INSTRUCTION MANUAL 7J1 9027 000 Ver 1 February 2016 MODEL HFS 4 HYDRIDE FORMATION SYSTEM ...