8.3 Operation
8 - 4
8.3 Operation
Follow the instructions below, assuming the instrument is
diagnosed on all items in the flame mode.
The lamp or standard solution may not be required if all
diagnostic tests are not performed.
(1) Install the lamps into the lamp turret.
The Hg and Cu lamps should be set in No. 8 and 7,
respectively.
(2) Use the standard burner and provide the “Air-C
2
H
2
” flame.
(1) Click the [Diagnosis] button in the toolbox to display the
Diagnosis window.
Fig. 8-1 [Diagnosis] Button
(2) Click the [Measurement Mode] button on the toolbar, or
[Measurement Mode] in the [Method Setup] menu.
The Measurement Mode dialog box opens.
In Measurement Mode, select [Flame].
Fig. 8-2 [Measurement Mode] Button
8.3.1 Preparation
8.3.2 Setting
of
Conditions
Summary of Contents for ZA3000 Series
Page 423: ...9 3 5 9 11 Fig 9 14 Diagnosis Log Dialog Box ...
Page 449: ...10 5 Reflecting on Analysis Conditions 10 24 Fig 10 16 Method Window Unmark the checkbox ...
Page 455: ...INDEX 4 V Verify 3 34 W Working curve graph 4 1 Wavelength accuracy 9 1 ...
Page 456: ...INSTRUCTION MANUAL 7J1 9027 000 Ver 1 February 2016 MODEL HFS 4 HYDRIDE FORMATION SYSTEM ...