Hitachi ZA3000 Series, Instruction Manual

Page: 315 / 522

4.4.1
4 - 17
(3) Enter a file name.
The default file name is Result yyyy_mmdd_hhmm_ss.adg
(yyyymmddhhmmss denotes the date and time point of
measurement end or sequence end). There is no problem
in using the default file name, but you can change it to
another file name for easier identification.
(4) Click the [Save] button.
When a file of the same name already exists, a dialog box
for confirming overwriting on the file is displayed. Check
the file name, and then click the [Yes] or [No] button.
NOTE : If you attempt to terminate the atomic absorption
spectrophotometer application or close the Data
Process window, a dialog box appears to check
whether you want the results saved.
When clicking [No] in this box, the data will be lost
without saving it.