Hitachi ZA3000 Series, Instruction Manual

Page: 463 / 522

IMPORTANT - 5
(m) Failure due to a life-limited part that has exceeded the end
of its useful lifetime.
(4) Disclaimer of Warranty
THE MANUFACTURER MAKES NO WARRANTIES, EITHER
EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN,
INCLUDING WITHOUT LIMITATION THEREOF, WARRANTIES
AS TO MARKETABILITY, MERCHANTABILITY, FOR A
PARTICULAR PURPOSE OR USE, OR AGAINST
INFRINGEMENT OF ANY PATENT. IN NO EVENT SHALL
THE MANUFACTURER BE LIABLE FOR ANY DIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES RESULTING FROM
ANY DEFECTIVE PRODUCT OR THE USE OF ANY
PRODUCT.
NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN
BY THE MANUFACTURER, ITS DEALERS, DISTRIBUTORS,
AGENTS OR EMPLOYEES SHALL CREATE A WARRANTY OR
IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
Service Life of This Instrument
This instrument has a useful service life of seven years after the date
of its initial use (installation), which is estimated under the condition
that periodic maintenance, checkup, replacement of life-limited parts,
and repair of worn parts are carried out as specified in the present
instruction manual.
(In use of the instrument under standard operating conditions
(8 h/day, 20 days/month))
For using the instrument beyond the useful service life, it shall be
checked for safety by Hitachi High-Tech Science Corporation sales
representative or service office of Hitachi High-Technologies
Corporation sales representative. (This safety check will be
available on a chargeable basis.)
If use of the instrument is continued without receiving the safety
check, the instrument might become faulty and cause a danger.
Note that replacement may be recommended as a result of the safety
check.