Hitachi ZA3000 Series, Instruction Manual

Page: 83 / 522

3.10 Clearing of Monitor Graph
3 - 44
3.10 Clearing of Monitor Graph
Click the [Reset Monitor] button on the toolbar to clear the
signal displayed on the monitor graph and display a graph from
the beginning.
3.11 Changing the Display of a Profile Graph
The scale can be changed individually for each profile graph.
Move the cursor over the scale and right-click to display a popup
menu. Click the desired item in the menu.
The function of each item is described below.

For each sample
A profile is displayed for each measurement and updated
with a new profile upon completion of the next measurement.
This can be done by clicking
.

Overlay
A profile is overlaid upon completion of each measurement.
The number of data points to be overlaid can be specified
using [No. of Overlays]. The number of overlays can be set
to a value from 1 to 100. This can be done by clicking
.
The scale is automatically determined according to the signal
strength
Refer to 3.9“Changing the Display of a Monitor Graph.”

Trace: Refer to 3.9.1 “Trace.”

Ruled Line Refer to 3.9.2 “Grid.”

Change Display Signal/Scale: Refer to 3.9.3
“Signal/Change Scale.”

Vertical Axis Auto Scale: Refer to 3.9.4 “Y-axis Auto-
Scale.”

Reset Scale: Refer to 3.9.5 “Reset Scale.”

Print Graph: Refer to 3.9.6 “Print Graph.”

Copy Graph: Refer to 3.9.7 “Copy Graph.”
3.11.1 Display Mode
3.11.2 Auto Scale
3.11.3 Other Menus