Hitachi ZA3000 Series, Instruction Manual

Page: 317 / 522

4.4.2
4 - 19
(3) Output Element
When there is measurement data of multiple elements, you
should select All Elements or Select Element. In the case
Select Element is specified, the element(s) for printout
should be checked. When there is data of only one
element, there is no need to change from All Elements.
(4) In the [Header], [Method], [Working Curve], [Data] and
[Profile] fields, click the check box of the desired item for
printout to place the check mark in it. When turning on the
[Statistics] check box in [Data], statistical data is included in
the output of the Detail Table concerned.
Note that Operator, Analysis Name and Comment entries
can be changed in [Parameter List] of the [Edit] menu of
the upper Menu Bar after closing the Report dialog box.
NOTES : 1. When turning on the [Graph] check box in
[Profile], the [Auto-Scale] check box in [Profile]
can be selected.
If the [Auto-Scale] check box is removed, ABS and
REF range can be set up.
Input range: -4.0000 to 4.0000
2. When turning on the [Data] check box in [Profile],
all the absorbance data acquired by computer
every 0.02 second will be output. Note that the
number of pages to print increases as the number
of data increases. Therefore, turn off the check
box except when detailed analysis is desired.
(5) In the [Left Margin] field, mark any of the radio buttons by
clicking. The printing position changes to the right and left
and the margin spaces also change.
For inserting page numbers, turn on the [Page No.] check
box and mark the radio button for the desired inserting
position.
(6) In [Output to], specify Printer.