3.1 Generation of Measurement Conditions
3 - 42
Automatic reporting
If this box is checked, the measurement results will be printed
in the specified format after completion of the measurement
sequence. Formats include print (paper), text and Microsoft
Excel.
When auto-printing is not specified, printing can be made upon
selecting the desired items at the end of measurement.
Given here is a simple example where auto printing is not made.
In this case, the procedure is advanced without setting anything
on the Report Format dialog.
Click the [Parameter List] button (<10> in Fig. 3-1), and a list of
conditions will be displayed to allow check of the main set
parameters. Display is changeable by the [Conditions for Each
Element] and [Common Conditions] tabs at top of this window.
In particular, confirm that the number of measurement
repetitions and other parameters required to be set for each
element are set properly (this window is used only for review and
does not allow any editing).
Fig. 3-30 Parameter List Window (for Each Element)
3.1.11 Check
of
Analytical
Conditions
Summary of Contents for ZA3000 Series
Page 423: ...9 3 5 9 11 Fig 9 14 Diagnosis Log Dialog Box ...
Page 449: ...10 5 Reflecting on Analysis Conditions 10 24 Fig 10 16 Method Window Unmark the checkbox ...
Page 455: ...INDEX 4 V Verify 3 34 W Working curve graph 4 1 Wavelength accuracy 9 1 ...
Page 456: ...INSTRUCTION MANUAL 7J1 9027 000 Ver 1 February 2016 MODEL HFS 4 HYDRIDE FORMATION SYSTEM ...
