meter is supplied complete with:
There is too much light to perform a measurement.
Please check the preparation of the zero cuvette.
There is not enough light to perform a measurement.
Please check the preparation of the zero cuvette.
The sample and the zero cuvette are inverted.
indicates that the sample absorbs
A flashing value of the maximum concentration indicates
the reading is over range. Dilute the sample and re-run the test.
The battery must be replaced soon.
This indicates that the battery is dead and must be
For more details about spare parts and accessories
see “Accessories”.
w w w . h a n n a i n s t . c o m
±1.0 ppm ±5% of reading @ 25 °C / 77 °F
Standard Methods for the Examination
0 to 50 °C (32 to 122 °F);
max 95% RH non-condensing