Fuji Electric ALPHA5 Smart, User Manual

Page: 461 / 636

CHAPTER 10 PERIPHERAL EQUIPMENT
Optional Equipment
10-37
10
Monitor (CN4)
A measuring instrument or similar is connected to the connector 4 (CN4) of the servo amplifier.
The signal of this connector is analog output voltage for measuring instrument and is not necessary
for servo amplifier operation.
This connector is not prepared as option.
1
MON1 3 M5(0 V)
2 MON2 4 M5(0 V)
External regenerative resistor (1)
Model: WSR-401
Applicable range: servo amplifier model: RYH201F5-VV2, RYH401F5-VV2
182.5±1.5
172±1
1000
+100
0
20±0.3
※取付部分の厚みは１．２ｍｍ
42
.5
150±1

Connect the regenerative resistor to the servo amplifier with a 10 m or shorter cable.

The external regenerative resistor becomes hot. Keep flammable matters away from the
external regenerative resistor.

For connection of the external regenerative resistor, refer to "10.8 External Regenerative
Resistor."
Item
Model
Resistor
Thermistor
Resistance
Allowable power
Operating temperature
Dielectric strength
Contact capacity
Specifications
WSR-401
68
Ω
17 W (cont.)
Open at 135
±
10
°
C
For 1 minutes at 1.5 kV AC
30 VDC 3 A
* Thickness of the installed section: 1.2 mm
■ Model and manufacturer
Crimp socket DF11-4DS-2C
Crimp terminal DF11-2428SC
Hirose Electric Co., Ltd.
4
2
3
1